Seca 264 Bedienungsanleitung PDF herunterladen (Seite 59)

Operate head slide • 59

English

10. Use the arrow key (hold/zero) to enter the length of

the object.

11. Confirm the set value with the Enter key (send/

print).

The device is calibrated. You can perform height

measurements with the device.

5. OPERATE HEAD SLIDE

5.1 Measure height

Start measuring height 1. Press the Start key of the head slide.

“----” appears in the display.

NOTE

If you want to transmit the measured result to

receivers from the

seca 360° wireless system,

ensure that the receivers are switched on.

2. Keep the brake button pressed and move the head

slide until a length value appears in the display.

3. Hold down the brake button and push the head

slide up far enough so the patient can get under it

comfortably.

4. Ask the patient to step under the head slide.

– Back towards the head slide

– Heels against the heel stop

– Back and head straight

5. Hold down the brake button and push the head

slide down until it is in contact with the patient’s

head.

6. Pull the Frankfurt measure out of the head slide.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 274 275

Keine Kommentare

Seca 264 Bedienungsanleitung Seite 59